Jump to content
STARMEDIC

Hangar Console Commands

Recommended Posts

Ich habe im RSI Forum etwas gefunden, was dabei helfen soll die Bildqualität und Performance im Hangar zu verbessern. Viele düften bereits FOV und MoitionBlur 0 kennen, aber die anderen Dinge waren mir auch teils unbekannt. Einfach mal testen:

 

1.Start the Hangar
2.Press ^ (left of 1)

3.Now you can copy one or all of the commands to the console:

Switch with alt-tap to windows and copy with strg+c than back to the hangar and

paste strg+v


sys_spec_objectdetail = 6
sys_maxfps = 30 (nur wenn man nicht genug Performance hat)
cl_fov 50 (Hier würde ich bei 16:10 Monitoren auf "75" - "80" gehen, auch wenn die Performance leidet)
r_vsync = 0
r_MotionBlurShutterSpeed = 0
r_motionblur 1
r_sharpening 1.00
r_HDRBloomratio 0.04
r_gamma 1.042
i_mouse_accel = 0
i_mouse_smooth = 10

 

Diese Befehle werden nach jedem Hangarneustart wieder zurückgesetzt!

 

 

 

Noch etwas zum Thema Kantenglättung und ständiger Grafikanpassung:

 

To enable hardware MSAA:
1. Install 7zip
2. Right-click '\StarCitizen\CitizenClient\Data\GameData.pak' and select '7zip'->'Open archive'
3. Browse to '\Libs\Config\Profiles\default'
4. Right-click 'attributes.xml' and select 'Edit'
5. Find 'MSAAHWEnabled' and change the Value to "1"
6. Find 'MSAAHWSampleMode' and change the Value to "4" or "8"
*. You may want to also find 'MotionBlur' and change the Value to "0" if you want it to stay off
7. Save and close; click 'Ok' to update the .pak
8. Delete the '\StarCitizen\CitizenClient\USER\Profiles\default' folder (it will be re-created with your new preferences encrypted inside)
9. Launch the Hangar and re-set your graphics options

[Note]: You will get occasional lighting/shadow oddities with AA enabled

Optional, but recommended:
1. Right-click '\StarCitizen\CitizenClient\Engine\Engine.pak' and select '7zip'->'Open archive'
2. Browse to '\Config\CVarGroups'
3. Right-click 'sys_spec_PostProcessing.cfg' and select 'Edit'
4. Change 'r_HDRBloomRatio' to have value 0.02
5. Change 'r_Sharpening' to have value 0
*. You may want to add 'r_AntialiasingMode=9' if you want additional post-process AA (It seems that hardware and software AA affect different objects)
*. You may want to change 'r_MotionBlur' to have value 0
6. Save and close; click 'Ok' to update the .pak
7. Launch the Hangar to enjoy less hazy blinding light and cleaner texture transitions from having removed fake 'quality' from sharpening r_AntialiasingMode Values

  • 1 : SMAA LOW (1xMSAAx0T) - Fast / For consoles FXAA3
  • 2 : SMAA MEDIUM (1xMSAAx1T) - Default, quality/performance compromise
  • 3 : SMAA MGPU (2xMSAAx0T) - Crossfire/sli friendly mode
  • 4 : SMAA HIGH (2xMSAAx1T)
  • 5 : FXAA (1xMSAAx0T) - Fastest, alternative to SMAA LOW, for less sharp results
  • 6 : TXAA MEDIUM (2xMSAAx1T)
  • 7 : TXAA HIGH (4xMSAAx1T)
  • 8 : MSAA LOW (2xMSAA)
  • 9 : MSAA MEDIUM (4xMSAA)
  • 10 : MSAA HIGH (8xMSAA) - Recommended having sli/crossfire setup for using this mode

 

Nebel im Deluxe Hangar löschen:

 

Hello everyone,

Hopefully this will be fixed in the future because in my opinion there is just way too much fog in the Deluxe hangar in the current configuration. I think the main reason a lot of people want the business hangar over the deluxe is due to the excessive amount of fog in the Deluxe. So, below is what I did to remove the fog from my hangar, and I've included some pictures as well. I will say that the hangar is a little darker after doing this change so you may have to tweak the settings to your liking.

Here are some settings I adjust in the console on each load up when using the fog removal.
r_ssdo 3
r_motionblur 0
r_HDRBloomRatio 0
r_Gamma 1.18
e_ShadowsMaxTexRes 4096




Always backup your files before you begin.

1) First backup your GameData.pak file located in ...\CitizenClient\Data directory.
2) Using 7-Zip, open the GameData.pak file and browse to GameLayers directory.
3) Right click on Business.lyr and select edit (this will open the Business.lyr file with notepad).
4) In notepad scroll down and look for the line shown below.
< Variable Name="Fog color" Color="0.24680986,0.41515183,0.62534076" >
5) Starting with the line above, hightlight all the way down to the 2nd line listed below (< Spline......).
< Variable Name="Volumetric fog: Shadow range" Value="0.1">
< Spline Keys="0:0.1:0,0.0673611:0.1:0,0.355556:0.1:36,1:0.1:0,"/ >

6) Right click on the highlighted text that you now have selected and click Copy.
7) Now following the same steps as above, you want to open the Deluxe.lyr file rather than the Business.lyr file and replace those same variables by pasting what you just copied out of the Business.lyr file.
8) Click save in notepad and close the file.
9) 7-Zip will ask if you want to update the file in the archive, you want to click OK.
10) Load up the game and enjoy a fog free Deluxe Hangar!

 

 

Wenn man mehr Objekte (Schiffe und Einrichtung) hat als im Hangar angezeigt werden muss man folgendes machen:

 

Geht zu: \CitizenClient\Data\game.cfg, und springt zur Zeite  "hangar_maxships = 15". Jetzt die Zahl 15 z.B. auf 50 ändern und bei nächsten Start sollten alle erworbenen und im Hangar-Modul implementierten Schiffe angezeigt werden. Könnt ihr die Zeile nicht finden, einfach hinzufügen.

Edited by STARMEDIC
  • Upvote 3

Share this post


Link to post
Share on other sites

Prinzipiell zwar wirklich gut zu wissen, allerdings könnte CIG auch einfach das Optionsmenü im Detailgrad erweitern. Ich habe echt Probleme irgendwelche Unterschiede zwischen den jetzigen Einstellungsmöglichkeiten zu erkennen. Üblicherweise nutze ich fast in allen Spielen AA und drehe dafür auch gern die Details ein wenig nach unten, geht im Standard ja leider nicht.

Share this post


Link to post
Share on other sites

Natürlich kann man auch versuchen im Treibermenü der Grafikkarte für das Game die Einstellungen vorab zu fest zu bestimmen. Hat ein wenig was gebracht. Was auf jeden Fall etwas an Performance bringt, ist wenn man die FPS auf 30max setzt.

Share this post


Link to post
Share on other sites
Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...